Part Code Search |
|
 |
101089 Springs for motor brushes, for brushes type: 109550 and 103570 Processing: Tempered Price: 5.95 Pcs: 6 |  | 
| ||||
 |
103570 copper and metal carbon brushes L = 8,5 mm; for ball bearings motors 60 s Processing: Price: 8.50 Pcs: 4 |  |
| ||||
 |
SL 100 Motor structure unified with short wheelbase 25,5 mm for Le 626 and B&0 engines Processing: with threaded insert Price: 35.00 Pcs: 1 | |
| ||||
 |
109550 copper and Metal Carbon Brushes L = 6 mm; for bushing motors only 70-80 s Processing: Price: 6.90 Pcs: 4 | |
| ||||
 |
SFN 1121 Special screw for motor play recording on bearings for motors on bearings 50 s Processing: nichel palted Price: 8.00 Pcs: 6 | |
| ||||
 |
SFN 449 Screw M 1,4 x 6,5 for connection motor shaft on worm; only for ball bearings motors Processing: Price: 7.00 Pcs: 12 | |
| ||||
 |
SL 474 Permanent magnet for motor type SFN 734 e 736; from original bar mm 10x4x25 Processing: sintered Price: 16.95 Pcs: 1 | |
| ||||
 |
SL 501 Picks up current for electric motors 40-50 s ground side under screw Processing: nichel-plated Price: 4.95 Pcs: 4 | |
| ||||
 |
SL 500 Picks up current for electric motors 40-50 s Processing: nichel-plated Price: 4.95 Pcs: 4 | |
| ||||
 |
SL 591 Screw TC4 M2,6 x 19 for locking motors 40-50 s Processing: nichel-plated matt Price: 7.20 Pcs: 6 | |
| ||||
 |
SFN 740 Brushes with springs for motor SFN 734-736; brush holder screw internal diam. 2,3 x 6,5 mm Processing: Price: 8.00 Pcs: 4 | |
| ||||
 |
SFN 90 Brush holder screw for motor SFN 734-736. A couple of two, burnished and nickel plated. Processing: burnished and nickel plated Price: 8.00 Pcs: 4 | |
| ||||
 |
SFN 926 Spheres for motors and transmissions Worm diameter 1 mm Processing: Price: 8.00 Pcs: 50 | |
| ||||
 |
SL 082 Support higher motor brush holder (for any models 40's without ball bearings) Processing: Price: 8.50 Pcs: 1 | |
| ||||